Ace Equipment Company is the manufacturer of trash compactors and vertical balers to fit the needs of its customers waste and recycling.  ACE, launched in 1997, is located in Antigo, WI.  ACE builds the best trash compactors, apartment compactor, self-contained compactors, front-load compactors and vertical balers on the market. Constantly developing new products, ACE is on the cutting edge of technology with current equipment.

ACE Full Line Brochure

 

30 & 34 YD Self-Contained Compactor:

   

New Features and Benefits

    • Single Stationary Cylinder- Eliminating the scissor action what causes hoses and fittings to break
    • 2 Hose System- Eliminating 4 moving hoses from the system
    • Cylinder Raised in the compactor- Allows the cylinder and the hoses to operate above the liquid in the compactor. Seals, Hoses and fittings avoid liquid and ice.
    • No Follower plate- Reduces refuse behind the platen
    • Back Access Panel Eliminated- 100% concealed compartment won’t allow liquids to drain out onto the ground.
    • Retainer Teeth– To prevent rebound of material into the charge chamber.

Included Features and Benefits

  • Foam Door Seal with adjustable hinges for sure seal
  • Remote power unit with 10’ hoses
  • Timer control of platen no pressure switches
  • Rounded door for better compaction
  • Raised platen floor to stop platen freezing
  • Low temp oil for cold climates
  • No limit switches, less maintenance

30YD ACE Self-Contained Spec Sheet

 

 

2yd. 3yd & 4yd Stationary Compactor:

    

Professionally designed for: Industrial, Commercial, Municipal, Recycling Applications.

Included Features and Benefits

  • Super quiet, pump in tank with a quiet vane pump
  • Nylatron guide on ram for extra-long life
  • No limit switches all by-pass cylinders
  • CFAT Technology – Ram must build pressure on 2 continuous strokes for 8 seconds each time to determine fullness for advanced and full light
  • Intelligence Alerts
    • Stop button in
    • Motor trips
    • Door Interlocks
  • Simple 2-button control station – Start and Stop – Built in reverse
  • Remote control, 21’
  • Hinged retainer teeth
  • Controls come with control panel
  • Reinforced where floor meets sidewall
  • Front legs 4×4 tube for years of use

2 & 3YD Stationary Spec Sheet

6 Pak- Self-Contained Front Load Compactor :

  

Included Equipment and Features

  • Photoelectric to Start Compactor
  • Startup Alarm With Strobe Light
  • Single Side Latch System for Easy Container Release
  • Computer Controlled, no Limit Switches
  • Oil pressure gauge to determine container fullness
  • Multiple cycle timer to assure clean charging chamber
  • Low temperature oil for cold weather climate
  • Key-operated controls for authorized use only
  • Contoured container for greater compaction force
  • Doghouse with interlock

6 Pak Specs

 

A.5 Apartment Compactor :

Included Equipment and Features

  • Key-operated, Auto/cycle hold position controls
  • Platen floor ¼” AR plate
  • Platen face plate ¼” with platen sides ¼” plate.
  • Charge box floor ¼” plate with charge box sides ¼” plate
  • Oil pressure gauge to determine container fullness
  • Multiple cycle timer to assure clean charging chamber
  • Hinged breaker bar teeth
  • Power unit mounted on 12′ of hydraulic hoses
  • Low temperature oil for cold weather climate
  • Key-operated controls for authorized use only
  • Contoured container for greater compaction force
  • Doghouse with interlock

Apartment Compactor Specs

 

60″ & 72″ Vertical Baler:

ace-6030-hd-vertical-baler-full-2015[1]             v7244xhd-vertical-bailer-deep-penetration-ace-equipment-company[1]

  • 6″ Dia. x 48″ Cylinder with 4″ rod
  • 67,824 lbs. baling force
  • 10 HP Motor
  • 10 GPM – 1 Stage Pump
  • 3 Phase 230/460 Volt
  • Bale Size: 60″L x 30″W x 48″H
  • Baler Weight 4,850 lbs
  • 7” Diameter x 56” Cylinder with 4” rod
  • Deep Penetration
  • 115,000 lbs. Baling force
  • 15 HP Motor
  • 15 GPM – 1 Stage pump
  • 3 Phase 230/460 Volt
  • Bale size: 72” L x 44” W x 48” H
  • Baler Weight 8,900 lbs.

Included Equipment & Features

  • Auto/cycle hold position controls
  • AUTOMATIC load door opener
  • NYLATRON wear pads, no metal on metal contact
  • Easy tie channel system for fast, easy tying off bales
  • SYSTEM INDICATOR LIGHT to assure ease of operation
  • SOFT SHIFT design for added life of hydraulic components
  • TIMED BALING sequence for dense consistent bales NO PRESSURE SWITCHES
  • Key operated controls for authorized use only
  • COMPUTER OPERATED, with indicator lights IE: indicate door open
  • DWELL time against cardboard for dense consistent bales
  • Front and rear retainer teeth to prevent build up
  • Proximity (safety) sensors on both doors to assure safe operation, bottom door shut and feed gate locked before auto cycle can be initiated.
  • BRAT (Bale Ready Alert Technology), determine full bale without the use of limit switch or pressure switch
  • Super quiet, pump in tank with really quiet pump

60″ ACE 6030 Baler Spec Sheet

72″ ACE 7244 XD Baler Spec Sheet